 Endorsed artists using this productJeff CoffinEd Calle Dave Liebman Sonny Rollins Dino Soldo Cliff Anderson Charles Lloyd Steve Wilson Capitol Sax Quartet Chico Freeman Aaron Santee Andy Snitzer Edgar Winter Wayne Shorter Jeff Kashiwa Alex Han Mark Rivera Carl Fischer Fred Vigdor Stan Harrison Jason Marshall This product is especially suited forBrassSaxophone Trombone Trumpet Tuba French horn Flugelhorn Baritone horn Tenor Saxophone Alto Saxophone Listen and watch:
Polar pattern
Frequency Response
Pre-amp
|
The AMT LS is the ultimant in a woodwind or brass microphone. The system is meant to clip onto a flanged bell'd instrument. (Saxophones and Brass) The LS in it's stock configuration is the perfect choice for the player that needs control of there volume in a belt pack style setup.
The latest version of the AMT LS allows the player to easily change to and from AMT different preamps and allows for direct connections to either Shure or Sennheiser beltpack transmitters. With a change in a cable, convert your LS from a beltpack style preamp, to a "Studio" series model, and then to AMT "W"ireless setups. Cables sold seperatly. Excellent choice for soft to loud music for a principal artist, ensemble
setting, or a soloist. The microphone is suspended in a 4 point isolation ring reducing key and handling noise. Phantom power or 9Volt battery required. Comes with BP40 beltpack style preamp, case, and AMT disconnecting cable technology to allow the microphone to be used as "W"ireless or "Studio" models if needed. *Additional cables for a variety of setups sold seperately. **AMT Interface also sold seperately to allow connect
ions for many wireless systems. See the website for more info on AMT Interfaces.
| Element | Condenser |
|---|---|
| Polar Pattern | Cardroid |
| Frequency | 50Hz - 18kHz |
| Sensitivity | -65dB+ 4dB |
| Impedance | 150 Ohms* |
| Phantom Power | 12 to 52 vDC* Self-powered battery |
| Max input SPL | 120 dB |
| Dimension | 3.5" Flex Arm |
| Cable | 6' |
| Weight | Mic only: 36 grams |
The AMT LS can be used with most major brand wireless belt pack transmitters and recievers. With the AMT Interface, the microphone can plug directly into the interface which then plugs directly into most major brand wireless units. When ordering the AMT Interface, be sure to know your wireless make, model, and pin out configuration. Interfaces are made to order.
Other:
| Trombone |
| Tuba |
| French horn |
| Baritone horn |
